top of page

This bullet should be seated to around 1.080"

 9mm   RN  125 gr.   .356"- .357"

9mm graphic.JPG

*Regardless of Manufacturer, all bullets have their own unique Overall length (OAL). You simply need to determine the point on the bullet where the bearing surface meets the radius of the nose and seat it to that length. All of the bearing surface needs to be inside the case mouth. There are industry standards for Maximum OAL, but no such standard exists for a minimum OAL.

Screenshot 2024-09-19 135657.png
Screenshot 2024-09-19 135756.png
bottom of page